●
Settings
Sets the involved parameters for the operation of the smart cooling product.
●
Maint
–
Checks or deletes the logs.
–
Checks or clears component total runtime/run factor.
–
Manually diagnoses each component.
–
Calibrates the sensor/touch screen.
–
Exports data and upgrades the system.
●
About
Checks the model, manufacturer, monitoring version, detail version
information, and electronic label of the ACC.
5.3 Quick Settings
Prerequisites
After the system is powered on, the LCD is started, and the progress bar in the
startup screen is full:
●
For initial power-on, the system enters the quick setting screen. Set the
parameters by following the instructions in this section.
●
For non-initial power-on, the LCD automatically enters the home screen as
shown in
Procedure
Step 1 Set the language and tap Next, as shown by (1) in
Figure 5-3 Quick settings
NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
5 ACC Introduction
Issue 12 (2020-10-28)
Copyright © Huawei Technologies Co., Ltd.
94
