Figure 5-10 Setting read community
2. Tap the text box after Write Community, as shown in
. Set Write
Community as planned, tap
, and then tap Submit.
Figure 5-11 Setting write community
Step 4 Add an SNMPv3 user.
1. Tap Add under SNMP V3.
2. Enter a planned value for User Name, select values for Auth. Protocol and
Prop. Protocol from drop-down list boxes, and tap
, as shown in
MD5 and DES protocols are not secure. It is recommended that you set Auth.
Protocol to SHA, and set Prop. Protocol to AES. The following operations use
the recommended settings as an example.
NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
5 ACC Introduction
Issue 12 (2020-10-28)
Copyright © Huawei Technologies Co., Ltd.
102
