Huawei NetCol8000-A Series User Manual Download Page 27

Page: 27 / 215

No.

Name

Note

USB Host

● After installing the WiFi module, locally

connect to the smart cooling product over

the Service Expert app. Obtain the initial

startup password during deployment. View

or obtain the running information about

the smart cooling product during

preventive maintenance. (Applicable to

V200R001C20 and later versions)

NOTE

Only Huawei service engineers or authorized

service engineers are allowed to use the WiFi

module. To ensure security, remove the WiFi

module immediately after use.

● Insert the USB flash drive, import and

export the configuration file, export run

logs, and upgrade software.

RST

restart switch for the display

Reserved

SW1-4

Dual in-line package (DIP) switch on LCD

2.2.2.2 Functions and Features

Functions

●

When only one NetCol8000-A is running, the controller controls the

components of the NetCol8000-A to meet the temperature and humidity

requirements.

●

The LCD on the controller allows you to set the parameters of the

NetCol8000-A and query the status information.

●

When multiple NetCol8000-As work cooperatively, the controller optimally

distributes the heat load, greatly lowers the power consumption, provides

backup, and improves the reliability.

Features

The controller has the following features:

●

The controller provides a touchscreen with a user-friendly interface.

●

The controller controls the NetCol8000-A precisely and responds quickly.

●

The multi-level password protection prevents misoperations.

●

The controller protects the NetCol8000-A against overvoltage, undervoltage,

abnormal power failure, and water leaks, which ensures NetCol8000-A

reliability.

●

The LCD on the controller displays the operating status and duration of the

NetCol8000-A components in real time.

NetCol8000-A(050, 100) In-room Air Cooled Smart

Cooling Product

User Manual

2 Product Description

Issue 12 (2020-10-28)

Summary of Contents for NetCol8000-A Series
























































































































































































































Search results

Summary of Contents for NetCol8000-A Series

Reviews:

Related manuals for NetCol8000-A Series

Brands by name

Popular brands

Huawei NetCol8000-A Series, User Manual

Search results

Summary of Contents for NetCol8000-A Series

Reviews:

Related manuals for NetCol8000-A Series

Brands by name

Popular brands