Huawei NetCol8000-A Series, User Manual

Page: 138 / 215

c. Wait for 10 seconds or tap Yes. Figure 5-43 is displayed. Tap the screen.
When Figure 5-44 is displayed, the adjustment is complete.
d. Flip toggle switch 4 for the LCD to non ON.
NO TE
● After the DIP switch is calibrated, flip toggle switch 1 to ON, and others to the opposite
position.
● You need to manually operate the operation again from the first step to trigger the
touchscreen calibration function after the calibration failure.
5.8 How to Perform Quick Settings
Context
● On the quick settings screen, you can set the language, time, date, and
system.
● The Guest user can perform quick settings only during the initial power-on. If
you need to perform quick settings in other scenarios, log in as the Admin,
Engineer, or Operator user.
Procedure
Step 1 Choose Settings > Quick Settings on the home screen. The quick settings screen
is displayed, as shown by (1), (2), (3) and (4) in Figure 5-3 .
----End
5.9 How to Set the Language, Date, or Time
Context
● Enter the User Settings screen to set the Language, Date format, Date,
Time, Time zone, Password. You can also set LCD contrast, LCD saturation,
LCD brightness and LCD backlight off delay on the screen.
● To set the preceding parameters, log in as the Admin, Engineer, or Operator
user.
Procedure
Step 1 On the home screen, choose Settings > User Settings. Figure 5-46 is displayed.
NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual 5 ACC Introduction
Issue 12 (2020-10-28) Copyright © Huawei Technologies Co., Ltd. 129