Honeywell MAXPRO, Operator'S Manual

Page: 45 / 256

. . . . .
L O G G I N G O N A N D F A M I L I A R I Z A T I O N
Logging on Using Profiles
MAXPRO NVR 3.1 Operator’s Guide 45
5. Click OK . The profile is deleted.
Editing the Ports
The MAXPRO NVR user interface includes a provision to modify the port number associated
to the following components:
• Trinity Server
• Trinity Controller
• NeoEngine Server
To edit the ports
1. In the Server Settings dialog box, click Edit Ports . The port numbers associated to Server
IP/Name, Controller IP/Name and Storage Engine IP/Name are enabled for editing.
Figure 3-4 Editing the Ports
2. Change the port numbers as applicable.
3. Click Save .
Note:
Port 20000 is used for ONVIF discovery.