Honeywell MAXPRO, Operator'S Manual

Page: 118 / 256

C O N F I G U R I N G M A X P R O N V R
Performing User Administration
118 MAXPRO NVR 3.1 Operator’s Guide
4
6. Under the Role column, select the role you want to assign to the user from the drop-down
list.
7. Under the Password column, type the user's password.
Note:
Minimum length of the password is 6 characters. While adding a User, if the
password of other users added before 3.1 release is less than 6 characters then
an error message is displayed and all passwords need to be updated to meet the
minimum requirement.
8. Under the IsWindowsUser column, select the check box if the user is a Window's user.
9. Under the Email Address column, type the user's email address.
10. Click the Camera Association tab to associate cameras to the user.
• To associate one camera at a time, under the Available List , select a camera and
then click > . The selected camera appears under the Associated List .
• Click >> to associate all cameras to the Associated List .
• To remove an associated camera, under the Associated List , select a camera and
then click < . The selected camera appears under the Available List .
• Click << to disassociate all the cameras to the Available List .
11. Click the Recorder Event Association tab to associate recorder events to the user.
• To associate one particular event, under the Available List , select the check box
corresponding to the event and then click > . The select recorder event appears
under the Associated List .
• Click >> to associate all events to the Associated List .
• To remove an event, under the Associated List , select a check box corresponding to
the event and then click < . The selected event appears under the Available List .
• Click << to disassociate all the events to the Available List .
12. Click the Input Event Association tab to associate input events to the user.
• To associate one particular input event, under the Available List , select the check
box corresponding to the input event and then click > . The selected input event
appears under the Associated List .
• Click >> to associate all the input events to the Associated List .
• To remove an input event, under the Associated List , select a check box
corresponding to the input event and then click <. The selected input event appears
under the
Available List .
• Click << to disassociate all the input events to the Available List .