Hioki RM3542-50, Instruction Manual

Page: 83 / 234

5.7 Initializing (Reset)
77
5
SYSTEM
SET MONITOR
OFF/ ON,
1st/ 2nd, 0.000% to 9.999%
OFF, 1st, 0.000%
Settings Monitor function (p. 59)
PROBE CHECK OFF/ ON, 0 to 100 ms
OFF, 5 ms
Probe short-circuit detection function
(p. 57)
RETRY OFF/ ON, 1 to 50 ms
ON, 2 ms
Retry function (p. 62)
VOLT LIMIT OFF/ ON
OFF
Applied Voltage Limiter Function
(p. 64)
TRIG EDGE OFF EDGE/ ON EDGE
ON EDGE
Start Logic Setting (p. 106)
EOM
PULSE/ HOLD
1 to 100 ms
PULSE, 5 ms
End-of-measurement pulse width
(p. 105)
INTERFACE GP-IB/ RS232C/ PRINT
RS232C, 9600bps
GP-IB, ADR01, LF
Interface setting (p. 113)
PRINT MODE
NORMAL/ SAMPLE, 1 to 100,
ALL/ IN, 1/L/ 3/L
NORMAL, 100, ALL, 3/L
Set printing method (p. 91)
LOW POWER OFF/ ON
OFF
Low-Power Resistance Measure-
ment (p. 28)
JUDGE BEEP
OFF/ ON
OFF/ IN/ HI/LO/ LOW/ HIGH
OFF, HI/LO
Comparator judgment beeper
(p. 70)
KEY BEEP OFF/ ON
ON
Key beeper (p. 69)
CLOCK Clock setting (p. 72)
LINE FREQ AUTO/ 50 Hz/ 60 Hz
AUTO
Line frequency (detection) setting
(p. 71)
CONTRAST 0 ~100
50
Screen contrast adjustment
(p. 73)
BACK LIGHT 0 ~100
80
Screen backlight adjustment
(p. 74)
RESET -
-
Reset (p. 75)
ADJUST -
-
Adjustment screen (p. A13)
Display Setting value Default value Settings