Hioki RM3542-50, Instruction Manual

Page: 145 / 234

9.7 Message Reference
139
9
(1) Event Status Register
Device-Specific Commands
Set and Query Device-Specific Event Status Enable Register ESER0
Syntax Command
:ESE0
<0 to 255 (NR1)>
Query
Response
:ESE0?
<0 to 255 (NR1)>
Description Command Sets the mask pattern in Event Status Enable Register 0 (ESER0) for the
Event Status Register.
Note
Data initializes to zero at power-on.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Unused OR ERR Hi IN Lo INDEX EOM
Read Device-Specific Event Status Register ESR0
Syntax
Query
Response
:ESR0?
<0 to 255 (NR1)>
Note Executing ESR0? clears the contents of ESR0.
Set and Query Device-Specific Event Status Enable Register ESER1
Syntax Command
:ESE1
<0 to 255 (NR1)>
Query
Response
:ESE1?
<0 to 255 (NR1)>
Description
Command Sets a usable pattern in the Event Status Enable Register 1 (ESER1) for the
Event Status Register.
Note Data initializes to zero at power-on.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
unused unused unused unused VOLT CURR CE Hi CE Lo
Read Device-Specific Event Status Register ESR1
Syntax
Query
Response
:ESR1?
<0 to 255 (NR1)>
Note Executing ESR1? clears the contents of ESR1.