Hioki RM3542-50, Instruction Manual

Page: 28 / 234

2.1 Connecting the Power Cord
22
2.1 Connecting the Power Cord
• Before turning the instrument on, make sure the supply voltage matches the voltage
indicated on its power connector. Connection to an improper supply voltage may
damage the instrument and present an electrical hazard.
• To avoid electrical accidents and to maintain the safety specifications of this instru-
ment, connect the power cord only to a 3-contact (two-con ground) outlet.
• Before using the instrument, make sure that the insulation on the power cord is
undamaged and that no bare conductors are exposed. Any damage can cause elec-
tric shock, contact your dealer or Hioki representative.
To avoid damaging the power cord, grasp the plug, not the cord, when unplugging it from the
power outlet.
Rear Panel
1
Confirm that the supply voltage matches the instrument,
and connect the power cord to the power inlet on the instru-
ment.
2
Connect the plug of the power cord to the outlet.
The POWER button on the front panel lights up in red.
In event of a power outage, operation resumes with the
same settings when power is restored (breaker reset, etc.).
Power inlet