Hioki RM3542-50, Instruction Manual

Page: 59 / 234

4.6 Improving Probe Contact (Contact Improver Function)
53
4
For ranges between 300 k
Ω
and 100 M
Ω
, the [PULSE] setting is enabled by default.
Before measuring in the ranges from 300 k
Ω
to 100 M
Ω
with the Contact Improver function set to [ON], verify
that measurements are not biased.
PULSE
When both applied voltage
limiter and low-power resis-
tance measurement func-
tion are disabled.
PULSE
When the applied voltage
limit function or low-power
resistance measurement
function is enabled.
Setting Timing chart (Contact Improver Function)
*Internal delay is different for each range.
Measurement
Start
TRIG
Contact
Improver
current
Probe
Contact
Condition
Measuring
Internal
delay *
Stable Contact
Approx.
100
μ
s
Measurement
Start
TRIG
Contact
Improver
current
Probe
Contact
Condition
Measuring
Internal
delay *
Stable Contact
Approx.
300
μ
s
1
Open the Basic Settings screen.
2
Open the Measurement Settings Screen.
The Basic Settings screen appears.
The Measurement Settings Screen
appears.
[MEAS SETTINGS]
1
Selection
2