Hioki RM3542-50, Instruction Manual

Page: 87 / 234

6.2 Store as soon as Measurement is Stable (Auto-Memory Function)
81
6
This function automatically stores the measurement value each time the probes contact the sample
with internal triggering.
When the specified number of values have been acquired, auto-storage operation stops.
Statistical calculations are applied to the stored data, with results output to the screen or printer
(RS-232C).
See: "6.3 Performing Statistical Calculations on Measurement Values" (p. 84)
"Chapter 7 Printing" (p. 89)
Data storage and printing can be automatically controlled by the Auto-Memory function.
The Auto-Memory function is disabled by default.
Enable the Auto-Memory function before setting the number of values to store.
Enabling the Auto-Memory function affects other functions as follows:
• Statistical calculation is forcibly turned on.
• The voltage level monitor function is forcibly turned off (the setting itself is not set to OFF, but the function is
disabled).
• The trigger source setting is forcibly turned to internal [TRG: INT].
When the trigger source is set to external [TRG: EXT], the Auto-Memory function is forcibly disabled.
Deleting Stored Data
Stored data is automatically erased at the following timings:
Enabling the Auto-Memory Function
6.2 Store as soon as Measurement is Stable
(Auto-Memory Function)
Printing (p. 93)
Prepare the printer (p. 89).
Enable Auto-Memory and set
the number of values to store.
Setting judgment
criteria. (p. 36)
Measure
Beeper notifies when the specified number of values are stored.
•
When the memory function setting (including data-mem-
ory) is changed (p. 156)
•
When the range is changed (p. 32)
•
When changing comparator settings (p. 36)
•
When the power is turned off
•
When printing (p. 93)
•
When the measuring object is changed (p. 28)
•
Upon system reset (p. 75)
•
Upon setting the auto-memory number of values to store
(p. 82)
1
Open the Basic Settings screen.
The Basic Settings screen appears.