Hioki RM3542-50, Instruction Manual

Page: 55 / 234

4.4 Setting the Measurement Integration Time Option
49
4
•
The instruments accuracy specifications are applicable only with the default integration times.
Investigate your measurement requirements carefully before changing the integration time.
•
When the effects of power line noise can be ignored, the integration time can be set longer than the default to reduce
scattering of measurement values. On the other hand, if the integration time is too short, scattering increases.
For high-or low-resistance and low-power resistance measurements that are easily affected by power line noise, we
suggest setting according to the power line period (PLC units).
3
Select the integration setting units.
4
Select the integration time.
5
Return to the Measurement screen.
Selection
1
Sets in units of time.
Sets in units of power line cycles.
2
The setting is specific to the selected range (p. 43).
Selection
1
Setting range:
•
When setting in ms units:
0.1 ms to 100.0 ms
•
When setting power-line-cycle units:
1 to 6 PLC (60 Hz), 1 to 5 PLC (50 Hz)
2
3
Returns to the setting screen.
Saves and return to previous screen.
Discards setting and return to previ-
ous screen.
The confirmation screen appears.