Hioki RM3542-50, Instruction Manual

Page: 194 / 234

Chapter 10 Specifications
188
(26) Settings Monitor Function
(27) Retry Function
(28) Applied Voltage Limiter Function
(29) Self-Test Function
(30) Trigger Source Setting
(31) Measurement Speed
(32) Key-Lock Function
Operation Measurement settings of two instruments are compared, and if different, an alarm
sounds and TRIG signal input is blocked.
However, the comparator thresholds of the 1st instrument can be smaller than those of
the 2nd.
Default setting OFF, 1st, 0.000%
Setting Function: ON / OFF
Measurement stages: 1st / 2nd
Tolerance range: 0.000% to 9.999%
Compared contents Comparator threshold, measurement speed
Operation The Retry function enables measurement to be automatically retried when a measure-
ment fault occurs due to probe chatter.
If a measurement fault persists after the specified continuous retry interval, retrying is
aborted and the EOM signal is output.
Default setting ON, 2 ms
Setting Function ON/ OFF
Continuous retry interval 1 ms to 50 ms
Operation Limits the voltage applied for resistance measurement (setting affects all ranges).
Default setting OFF
Setting ON/ OFF
At power-on ROM/RAM check, non-volatile ROM checksum test
Default setting EXT (external)
Settings INT (Internal)/ EXT (external)
Default setting FAST
Setting FAST/ MED/ SLOW
Operation Disables operation of unneeded keys.
Setting (1) Disables all except the comparator setting and cancel keys
(2) Disables all except the cancel key
(3) All front panel keys are disabled when the KEY_LOCK signal is received.