Hioki RM3542-50, Instruction Manual

Page: 185 / 234

9.10 Device Compliance Documents
179
9
"Information on compliance to standards" based on the IEEE488.2 standard
9.10 Device Compliance Documents
Item Description
1. IEEE 488.1 interface functions See: "GP-IB Specifications (Interface Functions) (RM3542-
51 only)" (p. 110)
2. Operation with a device address other than 0
through 30
A setting outside the 0 to 30 range cannot be performed.
3. Timing of changed device address recognition
A change of address is recognized immediately after changing.
4. Device settings at power on
Status information is cleared. Others will be backed up. How-
ever, the header on/off setting, response message separator
and terminator are all reinitialized.
5. List of message exchange options
•
Input buffer capacity and operation
See: "Input Buffer" (p. 120)
Queries to which multiple response message units are re-
turned.
:CALCulate:STATistics:NUMBer?
.................2
:CALCulate:STATistics:MAXimum?
..............2
:CALCulate:STATistics:MINimum?
..............2
:CALCulate:STATistics:LIMit?
....................4
:CALCulate:STATistics:DEViation?
.........2
:CALCulate:STATistics:CP?
............................2
:MEMory:DATA?
..................... Number of stored values
:CALCulate:LIMit:ABS?
......................................2
:CALCulate:LIMit:PERCent?
............................2
:SYSTem:DATE?
...........................................................3
:SYSTem:TIME?
...........................................................3
•
Queries producing responses when syntax is checked:
All queries produce responses when syntax checking is
performed.
•
Whether any queries produce responses when read:
There are no queries which produce response messages at
the instant they are read in by the controller.
•
Whether any commands are coupled:
There are no relevant commands.
6. Summary of functional elements for use when
constructing device specific commands, and
whether compound commands or program
headers can be used:
The followings can be used.
•
Program message
•
Program message terminator
•
Program message unit
•
Program message unit separator
•
Command message unit
•
Query message unit
•
Command Program Headers
•
Query Program Header
•
Program data
•
Character program data
•
Decimal program data
•
Compound commands and program headers
7. Buffer capacity limitations for block data
Block data is not used.