Hioki RM3542-50, Instruction Manual

Page: 43 / 234

3.7 Judging Measurement Values (Comparator Function)
37
3
The comparator function is enabled by default.
When the function is disabled, comparator settings are ignored.
Example: Set a reference value of 10.5 Ω with +4.5% and -4.5% judgment tolerances.
To abort the setting process, press . Settings are abandoned and the display returns to the previous
screen.
Enabling and Disabling the Comparator Function
1
Open the Basic Settings screen.
2
Enable or disable the comparator function.
3
Return to the Measurement screen.
The Basic Settings screen appears.
1
Selection
2
Disables the function.
Enables the function.
Press the up/down
cursor keys to change
the setting.
(When the function is disabled)
Comparator judgments are indicated only when the function is enabled.
Decide According to Reference Value and Tolerance (REF% Mode)
1
Open the relative tolerance setting screen.
Relative value =
Reference
value
Measurement
value
- 1
×
100 [%]
Setting range:
-9.999% to +9.999% (When 10% or less)
-99.99% to +99.99% (When more than 10%)
Reference value
Positive tolerance (upper judgment thresh-
old)
Negative tolerance (lower judgment thresh-
old)