Hioki RM3542-50, Instruction Manual

Page: 76 / 234

5.2 Setting the Comparator Judgment and Key Beepers
70
The comparator judgment beeper can be enabled and disabled.
The judgment beeper is disabled (OFF) by default.
Setting the Comparator Judgment Beeper
1
Open the Basic Settings screen.
2
Open the System screen.
3
Select whether to enable or disable the judgment beeper.
4
Select the judgment beep conditions.
5
Return to the Measurement screen.
The Basic Settings screen appears.
The System screen appears.
[SYSTEM]
1
Selection
2
Selection
1
2
Disables the beeper (default)
(go to step 5).
Enables the beeper.
Selection
1
2
IN (beep when within range)
HI/LO (beep when out of range)
LOW (beep when below lower threshold)
HIGH (beep when above upper threshold)
Returns to the setting screen.
Saves setting and return to previous screen.
Discards setting and return to previ-
ous screen.
The confirmation screen appears.