manualshive.com logo in svg

Hioki MR8880-20, Instruction Manual

Share
Download
Hioki MR8880-20 Instruction Manual Download Page 72

3.3  Basic Operation

62

The measurement data can be printed with an optional printer.

See:

About connecting the printer and loading the recording paper

 

"2.4  Connecting Printer and Loading Recording Paper (Options)" (p. 41)

 

Various Printing Methods: "Chapter 7  Printing" (p. 165)

(When default settings)

Keys can be disabled to avoid inadvertent operations.

Printing Data

Press the 

PRINT

 key.

The measurement data is 
printed.

A hard copy of the screen is 
printed.

Press the 

COPY

 key.

Disabling Key Operations (Key-Lock Function)

Press and hold the right and left cursor keys for 
three seconds to lock the other keys, and repeat to 
unlock.

Summary of Contents for MR8880-20













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands