Hioki MR8880-20 Instruction Manual Download Page 141

Page: 141 / 300

5.1 Observing Waveforms

131

Cha

r 5
W
avef

orm

Analy

sis

View data during and after measuring on the Waveform Screen.

Press the

WAVE

key to display the Waveform screen. Repeated key presses cycle

the screen through seven types.

Waveform Analysis

Chapter 5

5.1 Observing Waveforms

Displaying Waveforms (Display Descriptions)

Analog and logic
waveforms

Displays acquired data
as waveforms.

Trigger Mark

Indicates a trigger event

Jump Function

(p. 137)

You can specify the
position you want to
display.

The settings can be changed. (The setting op-
tions are the same as on the Setting screen.)

• Function

[Highspeed]/[Realtime]

• When

[Highspeed]

Setting time base range (p. 71) and magnifica-

tion in the horizontal axis direction (p. 89)

• When

[Realtime]

Recording interval (data acquisition interval)(p.

79) and Display time base (time per horizontal

division) (p. 90)

Waveform display type

(default setting:

[Wave+Set]

)

You can switch between five types of

waveform display (p. 25).
• Viewing values of cursors on waveform

(p. 138)

• Viewing numerical calculation result

(p. 177)

In addition, you can switch the display, and

confirm channel and trigger settings on the

Waveform screen.

Move to a

setting item.

Apply

Open the setting

options for the item
to be set

Select from the
listed options.

Setting Procedure

Changing the Gauge
You can display all of the
gauges, and the gauge of
the specified channel (p.
134).

Scroll Bar (p. 133)

Shows the range and

position of the dis-
played waveform.

Information such as measurement start time and trigger times is
displayed below the scroll bar.

Summary of Contents for MR8880-20













































































































































































































































































































Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands

Hioki MR8880-20, Instruction Manual

Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands