Hioki MR8880-20, Instruction Manual

Page: 47 / 300

2.2 Connecting the AC Adapter
37
2
Chapter 2 M
eas
ureme
n
t Prep
ar
at
ions
Connect the power cord and the instrument to the supplied Model Z1002 AC
Adapter, then plug the power cord into an outlet. When used with the battery pack
installed, the battery serves as an operating backup supply in case of power failure,
and the AC adapter otherwise has priority.
2.2 Connecting the AC Adapter
Before connecting the AC adapter, be sure to read "Using the AC
Adapter" (p. 14) and "Handling the Cords and Cables" (p. 10).
Operating Precaution
Connect the power cord to the inlet
socket on the AC adapter.
Rated supply voltage is 100
to 240 V AC, and rated sup-
ply frequency is 50 or 60 Hz.
1
2
Connect the output
plug of the AC adapter
to the instrument.
Plug the power cord into
the mains outlet.
3
Power cord
AC adapter
Right side
AC Adapter Socket
Be sure to secure the cord
with the hook to prevent
disconnection of the AC
adapter.
Raise up the hook.
Secure the cord of the AC adapter with the
protector hook.
Return the hook to
its original position.