![Hioki MR8880-20 Instruction Manual Download Page 267](http://html1.mh-extra.com/html/hioki/mr8880-20/mr8880-20_instruction-manual_2137332267.webp)
Appendix 1 Error Messages and Remedial Actions
A
5
Appendix
437
Saving wave data.Wait for a mo-
ment.
Some key operations are disabled because of the in-
creased load during real-time saving. Minimize key op-
erations as much as possible during real-time saving.
438
This folder is protected. Rename
for deleting.
This message is displayed to prevent accidental de-
letion of data folders. To delete a folder, first rename
it.
441
Insert the recording media. Un-
saved data will be lost soon.
A CF card or USB flash drive is not present. Insert
storage media.
501
File system error (I/O error).
An I/O error occurred while accessing the removal
storage. Reformat the removal storage. If the error
persists, try a different removal storage.If this error
occurs while using a good removal storage, the
HiCorder may be damaged, in which case contact
your dealer or Hioki representative.
502
File system error (Incorrect file
handle).
Turn the HiCorder off and back on. If the fault per-
sists, perform system reset (p. 204).
503
File system error (system config-
uration).
504
File system error (not enough
memory).
505
File system error (incompleted in-
formation).
The removable storage could not be recognized. Re-
format the removable storage on a PC. If the error
persists, try a different removable storage.
If this error occurs while using a good removable
storage, the HiCorder may be damaged, in which
case contact your dealer or Hioki representative.
506
File system error (incorrect de-
vice).
Turn the HiCorder off and back on. If the fault per-
sists, perform system reset (p. 204).
507
File system error (file protected).
The requested write process (including deletion)
could not be performed because the file attribute is
read-only. Use a PC to cancel the read-only setting.
508
File system error (failed to recog-
nize the format).
The removable storage could not be recognized. Re-
format the removable storage on a PC. If the error
persists, try a different removable storage.
If this error occurs while using a good removable
storage, the HiCorder may be damaged, in which
case contact your dealer or Hioki representative.
509
File system error (limit of the num-
ber of files).
The number of files to be processed exceeds the lim-
it, so processing cannot be performed. Delete files to
increase free space, or try another removable stor-
age.
510
File system error (same name
file).
An attempt was made to create a file with the same
name as an existing file. Change the name of the file
to be created (p. 162).
Message
Remedial Action
Summary of Contents for MR8880-20
