Hioki MR8880-20 Instruction Manual Download Page 67

Page: 67 / 300

3.3 Basic Operation

Chapt

3 Basic

Ope

rat

ing Procedures

The settings items can be changed.

There are three procedures available for configuring the settings depending on the
purpose of use.

For details, refer to each of the reference pages.

Configuring Settings (Changing Settings)

Select the item to
change.

Show available setting
options.

Select the desired

setting.

Setting Screen

Waveform Screen

Apply the new setting,

or cancel it.

Changing screen contents

(p. 63)

(p. 67)

(p. 157)

Configuring settings
by following instruc-

tions on the screen

(Easy Setup)

Configuring settings

individually

Loading setting

configuration data

Setting configuration
data can also be loaded
from Setting Wizard.

Summary of Contents for MR8880-20













































































































































































































































































































Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands

Hioki MR8880-20, Instruction Manual

Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands