Hioki MR8880-20 Instruction Manual Download Page 199

Page: 199 / 300

9.2 Starting & Stopping Measurement Periodically

189

Chapt

er 9 Sche

duling Me

asurement

You can perform measurement periodically.

9.2 Starting & Stopping Measurement

Periodically

Apply

Select

[Reservation]

When you want to set the current
time:

Select the clock mark (

), and then

press the

ENTER

key.

Select [

] (turn on) the check

box of the number (No.) for
which you want to configure the
schedule settings.

Set

[Reg]

[Type]

for the

schedule.

Set the periodic measurement
conditions.

You can set each of the start day and
time.

Daily

Perform measurement from the set start time to the set stop time every day.

Mon. to Fri.

Perform measurement from the set start time to the set stop time every day
from Monday to Friday.

Mon. to Sat.

Perform measurement from the set start time to the set stop time every day
from Monday to Saturday.

Sun., Mon.,
Tue., Wed.,
Thur., Fri., Sat.

Perform measurement from the set start time to the set stop time on the se-
lected days every week.

Select the

[Setting]

screen.

Change 1’s digit

Change 10’s digit

Apply

Select the setting field

Setting the date and time

Select

Summary of Contents for MR8880-20













































































































































































































































































































Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands

Hioki MR8880-20, Instruction Manual

Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands