Hioki MR8880-20, Instruction Manual

Page: 31 / 300

1.1 Product Overview and Features
21
1
Cha
p
te
r 1
Overview
This instrument is a waveform recorder that is easy to operate. It can be powered by
batteries, making it quick to employ in the field in the event of trouble. The measure-
ment data can be observed on the screen, calculated, and printed with a printer. You
can also check saved data on a computer. The instrument can be connected to a
computer and then controlled.
Overview
Chapter 1
1.1 Product Overview and Features
A
B
123.4V
Measure timing
Logic probes can be used to
measure the timing of control
signals.
Measure voltage and
current waveforms
Optional connection cords
and clamp sensors can be
used to record the voltage
and RMS value and measure
the current of, for example, a
commercial power supply.
Gauge display
(p. 134)
Zoom in/out
(p. 135)
Check (monitor)
the current input
state as a wave-
form and numerical
values (p. 55)
Event search
(p. 141)
T
1 2
Cursor Measure-
ments (p. 138)
Numerical Calcula-
tions (p. 177)
Measurement data can be
stored to and read from an
optional CF card or USB
flash drive (p. 147).
The supplied USB cable can
be used to transfer the data on
a CF card or USB flash drive
to a computer. The measure-
ment data can also be ana-
lyzed in software (p. 207).
mV A
Record anomalies
Abnormal events can be
analyzed by recording with
the trigger function (p. 110).
Unit conversion display
(p. 97)
Schedule measure-
ments
Measurements can be
scheduled.
Easy Setting Wizard
Always Monitor Input
State
The optional printer allows
you to keep the measure-
ment results
on paper
(p. 165).
Measuring and
Recording Saving,
Reading, and
File Manage-
ment
Printing
Analyzing