Hioki MR8880-20 Instruction Manual Download Page 201

Page: 201 / 300

9.3 Canceling a Schedule

191

Chapt

er 9 Sche

duling Me

asurement

To cancel a schedule or change the settings of a schedule, [Reserved] (schedule
standby state) needs to be cancelled first.

9.3 Canceling a Schedule

Apply

Select

[Reservation]

The schedule cancellation dialog box appears.

Select

[OK].

(To continue in the schedule standby state
without canceling the schedule, select [Can-
cel].)

Select [OK] to cancel the schedule standby state and open the Schedule screen.

Change the schedule as necessary.

See:

"9.1 Starting & Stopping Measurement on a Specified Day" (p. 187), "9 .2 Start-
ing & Stopping Measurement Periodically" (p. 189)

If you do not want to change the schedule, press the

ESC

key. The instrument returns

to normal operation.

Select the

[Setting]

screen.

Summary of Contents for MR8880-20













































































































































































































































































































Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands

Hioki MR8880-20, Instruction Manual

Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands