27 / 160
EN
PL
HU
SK
DE
CS
SPARK PLUG
check
- adjust
•
replace
•
SPARK ARRESTER
clean
•
FUEL TANK AND FILTER clean
•
• (3)
FUEL TUBE
check
every 2 years (replace if necessary) (3)
VALVE CLEARANCE
check
- adjust
• (3)
COMBUSTION
CHAMBER
clean
after every 200 hours (3)
(1) Service more frequently when used in dusty areas.
(2) Change engine oil every 25 hours when used under heavy load or in high ambient
temperatures.
(3) These items should be serviced by an authorized servicing dealer of our company, unless you
have the proper tools and are mechanically proficient.
OIL CHANGE
It is recommended to ask authorized service for oil change.
Drain the engine oil when the engine is warm. Warm oil drains quickly and complete.
Attention: Do not drain oil when the engine is running!
When you drain the oil from the top oil fill tube, the fuel tank must be empty or fuel can leak
out and result in a fire or explosion.
1. Disconnect the spark plug (pic. 14B) wire and keep it away from the spark plug.
2. Place a suitable container next to the engine to catch the used oil.
3. Remove the oil filler cap/dipstick. (pic. 12B).
4. Remove the drain bolt (pic. 12C) and allow the used oil to drain completely into the container.
5. For engine without drain plug, we recommend to use oil extractor pump, or drain the oil into
the container by slightly tilting the engine toward the oil filler cap/dipstick. Before tilting the
machine, remove fuel from tank. Keep the spark plug end of the engine up.
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take used oil in a sealed container to your local
recycling center or service station for reclamation. Do not throw it in the trash or
pour it on the ground or down a drain.
6. Reinstall the drain bolt (pic. 12C). With the engine in a level position, fill to the upper limit
mark (pic. 13).
WARNING! Running the engine with a low oil level can cause engine damage.
7. Reinstall the oil filler cap/dipstick securely (pic. 12B).
Warning!!! Wash your hands with soap and water after handling used oil.
