19 / 160
EN
PL
HU
SK
DE
CS
RESIDUAL RISKS
• Even if the device is used according to instructions, it´s impossible to eliminate all the risks
associated with its operation. The following risks may occur arising from device construction:
• Mechanical hazard, caused by cut and throw off.
• Electrical hazard caused by touch with parts under high voltage (direct contact) or with parts,
which came under a high voltage due to failure of the device (indirect contact).
• Heat hazard resulting in burning or scalding and other injuries caused by possible contact with
high temperature objects or materials including heat sources.
• Noise risk resulting in loss of hearing (deafness) and other physiological disorders (e.g. loss of
balance, loss of consciousness).
• Vibration risk (resulting in vascular and neurological harm in the hand-arm system, for example
so called “white finger disease”).
• Dangers caused by contact with harmful liquids, gas, mist, smoke and dust or by their inhalation,
relate to emissions (for example breathing in).
• Danger of fire or explosion relate to spilling of fuel.
• Dangers caused by failing in ergonomic principles by construction of the machine, for example dangers
caused by unhealthy position of body or excessive overcharge and unnature to the anatomy of the
human hand-arm, relate to construction of handle, equilibrium of the machine and using of toothrest.
• Dangers caused by unexpected starting, unexpected exceeding of engine revs caused by defect/
failure of control system, relate to the defects by the handle and placing of drivers.
• Dangers caused by impossibility to stop the machine in best conditions, relate to solidity of the
handle and placing of engine shut down device.
• Dangers caused by defect of machine control system, relate to solidity of the handle, placing
of drivers and marking.
• Dangers caused by tearing (of the chain) during running.
• Dangers caused by shooting up of subjects or splashing of liquids.
UNPACKING
• Carefully remove the product from the box.
• Carefully inspect all parts. If any part is damaged or missing, contact your dealer or authorized
service center.
• Do not throw away packaging materials until you have not reviewed carefully if they did not
remain a part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) do not leave within reach of children,
could be a possible source of danger. Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suffocating!
• Disposal must be made in accordance with the regulations in force in the country in which the
equipment was installed.
• Make sure that bags and containers of plastic material are left strewn freely in the environment
because they pollute it.
• If you have any doubt do not use the machine, but have it checked by an authorized service
center.
PACKAGE CONTENTS:
1x machine body, 1x left handle, 1x right handle, 1 x driving lever, 1 x depth limiter, 1 x console
handles, 1 x cover bracket for attaching handles, 1 x transport wheel, 2 x additional fenders,
2 x additional blade, screw set.
