manualshive.com logo in svg

H3C S3610-28F, Operation Manual

The H3C S3610-28F is a high-performance switch designed for seamless network operations. Ensure efficient usage with the comprehensive Operation Manual available for free download on manualshive.com. This manual provides detailed instructions for optimal functionality. Upgrade your network infrastructure with this reliable, user-friendly product.

Share
Download
background image

Operation Manual – Multicast Protocol 
H3C S3610&S5510 Series Ethernet Switches 

Table of Contents

 

v 

7.1.1 Introduction to MSDP .............................................................................................. 7-1

 

7.1.2 How MSDP Works................................................................................................... 7-2

 

7.1.3 Protocols and Standards......................................................................................... 7-8

 

7.2 MSDP Configuration Task List........................................................................................... 7-9

 

7.3 Configuring Basic Functions of MSDP .............................................................................. 7-9

 

7.3.1 Configuration Prerequisites..................................................................................... 7-9

 

7.3.2 Enabling MSDP ..................................................................................................... 7-10

 

7.3.3 Creating an MSDP Peer Connection .................................................................... 7-10

 

7.3.4 Configuring a Static RPF Peer .............................................................................. 7-10

 

7.4 Configuring an MSDP Peer Connection .......................................................................... 7-11

 

7.4.1 Configuration Prerequisites................................................................................... 7-11

 

7.4.2 Configuring MSDP Peer Description..................................................................... 7-11

 

7.4.3 Configuring an MSDP Mesh Group....................................................................... 7-12

 

7.4.4 Configuring MSDP Peer Connection Control........................................................ 7-12

 

7.5 Configuring SA Messages Related Parameters .............................................................. 7-13

 

7.5.1 Configuration Prerequisites................................................................................... 7-13

 

7.5.2 Configuring SA Message Content......................................................................... 7-13

 

7.5.3 Configuring SA Request Messages ...................................................................... 7-14

 

7.5.4 Configuring an SA Message Filtering Rule ........................................................... 7-15

 

7.5.5 Configuring SA Message Cache ........................................................................... 7-16

 

7.6 Displaying and Maintaining MSDP .................................................................................. 7-16

 

7.7 MSDP Configuration Examples ....................................................................................... 7-17

 

7.7.1 Example of Leveraging BGP Routes .................................................................... 7-17

 

7.7.2 Anycast RP Configuration Example ...................................................................... 7-23

 

7.7.3 Static RPF Peer Configuration Example............................................................... 7-27

 

7.8 Troubleshooting MSDP.................................................................................................... 7-31

 

7.8.1 MSDP Peers Stay in Down State.......................................................................... 7-31

 

7.8.2 No SA Entries in the Router’s SA Cache .............................................................. 7-31

 

7.8.3 Inter-RP Communication Faults in Anycast RP Application ................................. 7-32

 

Chapter 8 Multicast Routing and Forwarding Configuration.................................................... 8-1

 

8.1 Multicast Routing and Forwarding Overview ..................................................................... 8-1

 

8.1.1 Introduction to Multicast Routing and Forwarding................................................... 8-1

 

8.1.2 RPF Mechanism...................................................................................................... 8-2

 

8.1.3 Multicast Static Routes............................................................................................ 8-4

 

8.1.4 Multicast Traceroute................................................................................................ 8-5

 

8.2 Configuration Task List ...................................................................................................... 8-6

 

8.3 Configuring Multicast Routing and Forwarding.................................................................. 8-6

 

8.3.1 Configuration Prerequisites..................................................................................... 8-6

 

8.3.2 Enabling IP Multicast Routing ................................................................................. 8-7

 

8.3.3 Configuring Multicast Static Routes ........................................................................ 8-7

 

8.3.4 Configuring a Multicast Route Match Rule.............................................................. 8-8

 

8.3.5 Configuring Multicast Load Splitting........................................................................ 8-8

 

Summary of Contents for S3610-28F












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for S3610-28F

D-Link xStack DGS-3420 Series How To Set Up preview
xStack DGS-3420 Series
Brand: D-Link Pages: 2
D-Link DXS-3600-32S Quick Installation Manual preview
DXS-3600-32S
Brand: D-Link Pages: 29
D-Link DWS-1008 User Manual preview
DWS-1008
Brand: D-Link Pages: 454
D-Link DWS-1008 Product Manual preview
DWS-1008
Brand: D-Link Pages: 502
D-Link DGS-3312SR Product Manual preview
DGS-3312SR
Brand: D-Link Pages: 244
D-Link GO-SW-5G User Manual preview
GO-SW-5G
Brand: D-Link Pages: 20
D-Link DES-1008E Quick Install Manual preview
DES-1008E
Brand: D-Link Pages: 2
D-Link KVM-440 User Manual preview
KVM-440
Brand: D-Link Pages: 37
D-Link DES-1018DG Quick Installation Manual preview
DES-1018DG
Brand: D-Link Pages: 28
Patton electronics 6511RC User Manual preview
6511RC
Brand: Patton electronics Pages: 104
IBM 8237 Installation And User Manual preview
8237
Brand: IBM Pages: 166
Field Controls 46112100 Manual preview
46112100
Brand: Field Controls Pages: 4
Zamel Ledix WDN-01 Quick Manual preview
Ledix WDN-01
Brand: Zamel Pages: 2
Crestron CLW-LSWEX-1GD Installation And Operation Manual preview
CLW-LSWEX-1GD
Brand: Crestron Pages: 2
Raritan MCD-LED17 series User Manual preview
MCD-LED17 series
Brand: Raritan Pages: 89
Avenview SW-DVI-2X4 User Manual preview
SW-DVI-2X4
Brand: Avenview Pages: 10
J-Tech Digital JTD-3003 User Manual preview
JTD-3003
Brand: J-Tech Digital Pages: 13
ANTAIRA LMX-2602G-SFP Series Hardware Manual preview
LMX-2602G-SFP Series
Brand: ANTAIRA Pages: 19

Brands by name

Popular brands

Load more brands