Operation Manual – VRRP
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 VRRP Configuration
1-36
Admin Status : UP State : Master
Config Pri : 100 Run Pri : 100
Preempt Mode : YES Delay Time : 5
Auth Type : SIMPLE TEXT Key : hello
Virtual IP : FE80::10
Virtual MAC : 0000-5e00-0201
Master IP : FE80::2
The above information indicates that if VLAN-interface 3 on Switch A is not available,
the priority of Switch A reduces to 80 and it becomes the backup. Switch B becomes the
master and packets sent from Host A to Host B are forwarded by Switch B.
1.5.3 Multiple VRRP Standby Group Configuration Example
I. Network requirements
z
In the network, some hosts use FE80::10 as their default gateway and some hosts
use FE80::20 as their default gateway.
z
Load sharing and mutual backup between default gateways can be implemented
by using VRRP standby groups.
II. Network diagram
Figure 1-12
Network diagram for multiple VRRP standby group configuration
III. Configuration procedure
1)
Configure Switch A
# Configure VLAN 2.
<SwitchA> system-view
[SwitchA] ipv6