Operation Manual – SNMP-RMON
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 SNMP Configuration
1-10
# Enable the sending of Traps to the NMS with an IP address of 1.1.1.2/24, using
public
as the community name.
[Sysname] snmp-agent trap enable
[Sysname] snmp-agent target-host trap address udp-domain 1.1.1.2 udp-port 5000
params securityname public
2)
Configuring SNMP NMS
SNMPv3 uses authentication and privacy security model. In NMS, the user needs to
specify username and security level, and based on that level, configure the
authentication mode, authentication password, privacy mode, privacy password. In
addition, the time-out time and number of retries should also be configured. The user
can inquire and configure the switch through NMS. For detailed information, refer to the
NMS manuals.
Note:
The configurations on the agent and the NMS must match in order to perform the
related operations.
1.7 SNMP Logging Configuration Example
I. Network requirements
z
NMS and Agent are connected through an Ethernet
z
The IP address of NMS is 1.1.1.2/24
z
The IP address of the VLAN interface on Agent is 1.1.1.1/24
z
Configure community name, access right and SNMP version on Agent
II. Network diagram
Figure 1-3
Network diagram for SNMP logging
