Operation Manual – File System Management
H3C S3610&S5510 Series Ethernet Switches
Chapter 3 TFTP Configuration
3-4
3.3 Displaying and Maintaining the TFTP Client
To do…
Use the command…
Remarks
Display the configuration
of the TFTP client
display tftp client
configuration
Available in any view
3.4 TFTP Client Configuration Example
I. Network requirements
z
Use a PC as the TFTP server and your device as the TFTP client.
z
PC uses IP address 1.2.1.1./16 and a TFTP working directory has been defined
for the client.
z
On your device, VLAN-interface 1 is assigned an IP address 1.1.1.1/16. Make
sure that the port connected to PC belongs to the same VLAN.
z
TFTP a startup file from PC for upgrading and a configuration file config.cfg to PC
for backup.
II. Network diagram
Figure 3-2
Smooth upgrading using the TFTP client function
III. Configuration procedure
1)
Configure PC (TFTP Server), the configuration procedure omitted.
z
On the PC, enable TFTP server
z
Configure a TFTP working directory
2)
Configure the device (TFTP Client)
Caution:
If the free memory space of the device is not big enough, you should delete the existing
programs before downloading new ones.
# Enter system view.
<Sysname> system-view
