Operation Manual – IPv6 Routing
H3C S3610&S5510 Series Ethernet Switches
Chapter 5 IPv6 BGP Configuration
5-9
Note:
If the
default-route imported
command is not configured, using the
import-route
command cannot redistribute any IGP default route.
5.4.3 Advertising a Default Route to a Peer/Peer Group
Follow these steps to configure to advertise default route to a peer/peer group:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
Required
Enter IPv6 address family
view
ipv6-family
—
Advertise a default route
to a peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
default-route-advertise
[
route-policy
route-policy-name
]
Required
Not advertised by
default
Note:
With the
peer
default-route-advertise
command used, the local router advertises a
default route with itself as the next hop to the specified peer/peer group, regardless of
whether the default route is available in the routing table.
5.4.4 Configuring Route Distribution Policy
Follow these steps to configure policies for route distribution:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
Required
Enter IPv6 address family
view
ipv6-family
—
Configure outbound route
filtering
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
protocol process-id
]
Required
Not configured by default
