Operation Manual – NQA
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 NQA Configuration
1-23
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the NQA client
nqa-agent enable
Required
Create an NQA test group
and enter its view
nqa
admin-name
operation-tag
—
Set the test type to UDP
test-type
{
udpprivate
|
udppublic
}
Required
Configure a destination
address for a test
destination-ip
ip-address
Required
The destination address
must be the listening IP
address configured on the
NQA server.
Configure a destination
port
destination-port
port-number
If the test type is
UDP-Public, no port
needs to be configured. If
the test type is
UDP-Private, a port must
be configured and it must
be the listening port
configured on the NQA
server.
Configure the size of test
packets sent
datasize
size
Optional
100 bytes by default.
Configure a string of fill
characters of a test packet
datafill
text
Optional
The string of fill characters
of a UDP packet is the
string corresponding with
the ASCII code 00 to FF
by default.
Configure common
optional parameters
Optional Parameters for
NQA Tests
.
Optional
Enable the NQA test
test-enable
Required
View the test results
display nqa results
[
admin-name
operation-tag
]
Required
Available in any view.
II. Configuration example
1) Network
requirements
Use the NQA UDP-Private function to test the setup time for the UDP connection
between the local port (Switch A) and the specified destination port (Switch B). The port
number used is 8000.
