Operation Manual – Cluster Management
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 Cluster Management Configuration
1-15
Follow these steps to add/remove a member device:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Add a candidate device to
the cluster
add-member
[
member-number
]
mac-address
mac-address
[
password
password
]
Optional
Remove a member device
from the cluster
delete-member member-number
[
to-black-list
]
Required
II. Rebooting a member device
Communication between the management and member devices may be interrupted
due to some configuration errors. Through the remote control function of member
devices, you can control them remotely on the management device. For example, you
can reboot a member device that operates improperly and specify to delete the booting
configuration file when the member device reboots, and thus achieve normal
communication between the management and member devices.
Follow these steps to reboot a member device:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Reboot a specified
member device
reboot member
{
member-number
|
mac-address mac-address
}
[
eraseflash
]
Required
1.4 Configuring the Member Devices
1.4.1 Enabling NDP Globally and for Specific Ports
Refer to
Enabling NDP Globally and for Specific Ports
1.4.2 Enabling NTDP Globally and for Specific Ports
Refer to
Enabling NTDP Globally and for Specific Ports
1.4.3 Manually Collecting NTDP Information
Refer to