Operation Manual – MCE
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 MCE Configuration
2-1
Chapter 2 MCE Configuration
Note:
For detailed information on the routing protocol configuration mentioned in this chapter,
see the
IPv4 Routing
module of this manual.
2.1 Configuring a VPN Instance
2.1.1 VPN Instance Configuration Tasks
Table 2-1
Configure a VPN instance
Operation
Description
Related section
Configuring the operation
mode to MCE
Required
Create a VPN instance
Required
Associate the VPN instance
with an interface
Required
”
Configure the route-related
attributes for the VPN instance
Required
Route-related Attributes for a
VPN Instance
2.1.2 Setting the Operation Mode of the Switch to MCE
The switch must work in the operation mode of MCE to support MCE.
Table 2-2
Set the operation mode of the switch to MCE
Operation
Command
Description
Enter system view
system-view
—
Set the operation
mode of the switch
to MCE
switch-mode
mce
Required
By default, the device works in the
default mode and does not support MCE.