Operation Manual – NQA
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 NQA Configuration
1-7
2) Network
diagram
Figure 1-3
Network diagram for the DHCP test
3) Configuration
procedure
Note:
For the configuration of DHCP Server, refer to the
DHCP Configuration
part of the
manual.
Perform the following configurations on Switch A:
# Enable the NQA client, create a DHCP test group, and configure related test
parameters.
<SwitchA> system-view
[SwitchA] nqa-agent enable
[SwitchA] nqa admin dhcp
[SwitchA-nqa-admin-dhcp] test-type dhcp
[SwitchA-nqa-admin-dhcp] source-interface ethernet 1/0
# Enable the DHCP test.
[SwitchA-nqa-admin-dhcp] test-enable
# View the test results with the
display nqa results
command.
[SwitchA-nqa-admin-dhcp] display nqa results admin dhcp
NQA entry(admin admin, tag dhcp) test result:
Send operation times: 1 Receive response times: 1
Min/Max/Average Round Trip Time: 527/527/527
Square-Sum of Round Trip Time: 277729
Last succeeded test time: 2006-06-07 13:15:07.3
Extend result:
Packet lost in test: 0%
Failures due to Timeout: 0
Failures due to System Busy: 0
Failures due to Disconnect: 0
Failures due to No Connection: 0
Failures due to Sequence Error: 0
Failures due to Internal Error: 0