Operation Manual – Login
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 Logging in Through the Console Port
2-7
To do…
Use the command…
Remarks
Configure not to
authenticate users
authentication-mode
none
Required
By default, users logging in
through the Console port are
not authenticated.
Set the
baud rate
speed
speed-value
Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Set the
check mode
parity
{
even
|
mark
|
none
|
odd
|
space
}
Optional
By default, the check mode of
a Console port is set to
none
,
that is, no check bit.
Set the stop
bits
stopbits
{
1
|
1.5
|
2
}
Optional
The stop bits of a Console
port is 1.
Configure
the
Console
port
Set the data
bits
databits
{
5
|
6
|
7
|
8
}
Optional
The default data bits of a
Console port is 8.
Configure the command
level available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface.
Define a shortcut key for
starting terminal sessions
activation-key
character
Optional
By default, pressing Enter
key starts the terminal
session.
Define a shortcut key for
aborting tasks
escape-key
{
default
|
character
}
Optional
The default shortcut key
combination for aborting
tasks is < Ctrl+C >.
Make terminal services
available
shell
Optional
By default, terminal services
are available in all user
interfaces.
Set the maximum
number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length
0 command to
disable the function to display
information in pages.
