Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Chapter 6 Congestion Avoidance
6-4
To do…
Use the command…
Remarks
Enter
port
view
interface interface-type
interface-number
Enter
port
view or
port
group
view
Enter
port
group
view
port-group
{
manual
port-group-name |
aggregation
agg-id
}
Perform either of the two
operations.
The configuration
performed in port view
applies to the current port
only. Configuration
performed in port group
view applies to all the ports
in the port group.
Configure queue
length
burst-traffic
{
queue queue-id
length queue-length
}&<1-8>
Required
6.3.3 Configuration Example
I. Network requirements
Set the queue length of queue 1 and queue 3 to 8 and 32 on Ethernet 1/0/1.
II. Configuration procedure
# Enter system view.
<Sysname> system-view
# Enter port view.
[Sysname] interface Ethernet 1/0/1
# Configure queue length.
[Sysname-Ethernet1/0/1] burst-traffic queue 1 length 8 queue 3 length 32
6.4 Displaying and Maintaining Congestion Avoidance
To do…
Use the command…
Remarks
Display the configuration
information and statistics
information about WRED on
the port
display qos wred interface
[
interface-type interface-number
]
Display the queue length
configuration of a port
display burst-traffic interface
[
interface-type interface-number
]
Available in
any view
