Operation Manual – NQA
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 NQA Configuration
1-4
To do…
Use the command…
Remarks
Set the test type to ICMP
test-type
icmp
Optional
ICMP by default.
Configure a destination
address for a test
destination-ip
ip-address
Required
Configure the size of test
packets sent
datasize
size
Optional
56 bytes by default.
Configure a string of fill
characters of a test packet
datafill
text
Optional
The string of fill characters
of an ICMP packet is the
string corresponding with
the ASCII code 00 to 09
by default.
Specify a VPN instance
vpninstance
name
Optional
No VPN instance is
specified by default.
When there are multiple
VPNs, you need to use
this command to specify a
VPN instance for test.
Specify the IP address of
an interface as the source
IP address of an ICMP
test request packet
source-interface
interface-type
interface-number
Optional
The interface specified by
this command can only be
VLAN interface. In
addition, the interface
must be up. Otherwise,
the test will fail.
Configure common
optional parameters
Optional Parameters for
NQA Tests
.
Optional
Enable the NQA test
test-enable
Required
View the test results
display nqa results
[
admin-name
operation-tag
]
Required
You can execute the
command in any view.
II. Configuration example
1) Network
requirements
Use the NQA ICMP function to test whether the NQA client (Switch A) can send packets
to the specified destination (Switch B) and test the roundtrip time of packets.
2) Network
diagram
