Operation Manual – QinQ-BPDU Tunneling
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 BPDU Tunneling Configuration
2-2
II. BPDU transparent transmission
As shown in
, the upper part is the service provider network, and the lower
part represents the customer networks. The customer networks include network A and
network B. Enabling the BPDU tunneling function on the BPDU input/output devices
across the service provider network allows BPDUs of the customer networks to be
transparently transmitted in the service provider network, and allows each customer
network to implement independent spanning tree calculation, without affecting each
Configuring BPDU Transparent Transmission
.
Network
Network A
Network B
Customer
networks
BPDU input/output
device
BPDU input/output
device
Service provider
network
Figure 2-1
Network hierarchy of BPDU tunneling
z
At the BPDU input side, the device changes the destination MAC address of a
BPDU from a customer network from 0x0180-C200-0000 to a special multicast
MAC address, 0x010F-E200-0003 by default. In the service provider’s network,
the modified BPDUs are forwarded as data packets in the user VLAN.
z
At the packet output side, the device recognizes the BPDU with the destination
MAC address of 0x010F-E200-0003 and restores its original destination MAC
address 0x0180-C200-0000. Then, the device removes the outer tag, and sends
the BPDU to the destination customer network.
Note:
Make sure, through configuration, that the VLAN tag of the BPDU is neither changed
nor removed during its transparent transmission in the service provider network;
otherwise, the system will fail to transparently transmit the customer network BPDU
correctly.
