Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 Information Center Configuration
1-10
II. Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the
associated display function in order to display the output information on the monitor
terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do…
Use the command…
Remarks
Enable the monitoring of
system information on a
monitor terminal
terminal monitor
Required
Enabled on the console
disabled on the monitoring
terminal by default.
Enable the display of
debug information on a
monitor terminal
terminal debugging
Required
Disabled by default
Enable the display of log
information on a monitor
terminal
terminal logging
Optional
Enabled by default
Enable the display of trap
information on a monitor
terminal
terminal trapping
Optional
Enabled by default
1.2.4 Setting to Output System Information to a Log Host
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
default channel names.
Specify a log host and
configure the parameters
when system information
is output to the log host
info-center loghost
host
-
ip
[
channel
{
channel
-
number
|
channel
-
name
}
]
[
facility
local
-
number
] *
Required
Disabled by default with
channel 2 as the default
channel when enabled.
Configure the source
interface through which
log information can be
output to a log host
info-center loghost
source
interface-type
interface-number
Optional
No source interface is
configured by default, and
the system selects an
interface as the source
interface.