Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 Information Center Configuration
1-19
# syslogd -r &
Note:
Ensure that the syslogd process is started with the -r option on a Linux log host.
After the above configurations, the system will be able to keep log information in the
related file.
1.4.3 Outputting Log Information to the Console
I. Network requirements
z
Log information with a severity higher than informational will be output to the
console;
z
The source modules are ARP and IP.
II. Network diagram
Figure 1-3
Network diagram for sending log information to the console
III. Configuration procedure
# Enable information center.
<Sysname> system-view
[Sysname] info-center enable
# Specify the channel to output log information to the console (optional, Console by
default).
[Sysname] info-center console channel console
# Disable the output of log, trap, and debug information of all modules to the log host.
[Sysname] info-center source default channel console debug state off log state
off trap state off