Operation Manual – AAA-RADIUS-HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration
1-32
device can be configured with 16 schemes at most) fail to respond to the accounting-on
packets, the number of accounting-on packet retransmission attempts is too big, or the
accounting-on packet retransmission interval is too long, the device will not handle AAA
services until all these packets are retransmitted and all RADIUS servers have
responded to accounting-on packets.
Follow these steps to configure accounting-on function of a RADIUS server:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create RADIUS scheme
and enter its view
radius scheme
radius-scheme-name
Required
Not defined by default
Enable accounting-on
accounting-on
enable
Required
Disabled by default
Set the number of
accounting-on packet
retransmission attempts
accounting-on enable
send
send-times
Optional
5 times by default
Set the retransmission
interval of accounting-on
packets
accounting-on enable
interval
seconds
Optional
3 seconds by default
Note:
If the system has no authentication scheme enabled with the accounting-on function
when you execute the
accounting-on
enable
command,
you need to save the
configuration and restart the device so that the command takes effect. Otherwise, the
command takes effect immediately.
1.4.11 Configuring an IP Address for the Security Policy Server
Follow these steps to configure an IP address for the security policy server:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a RADIUS
scheme and enter its
view
radius scheme
radius-scheme-name
Required
Not defined by default
Configure an IP
address for the security
policy server
security-policy-server
ip-address
Optional
Not configured by default
