Operation Manual – RRPP
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 RRPP Configuration
1-18
1.7 Displaying and Maintaining RRPP
To do…
Use the command…
Remarks
Display brief information
about RRPP configuration
display rrpp brief
Display detailed
information about RRPP
configuration
display rrpp verbose domain
domain-id
[
ring
ring-id
]
Display RRPP statistics
display rrpp statistics
domain
domain-id
[
ring ring-id
]
Available in any
view
Clear RRPP statistics
reset rrpp statistics domain
domain-id
[
ring
ring-id
]
Available in user
view
1.8 RRPP Typical Configuration Examples
This section covers these topics:
z
Configuring Single Ring Topology
z
Configuring Intersecting Ring Topology
1.8.1 Configuring Single Ring Topology
I. Networking requirements
z
Device A, Device B, Device C and Device D constitute RRPP domain 1;
z
Specify the control VLAN of RRPP domain 1 as VLAN 4092;
z
Device A, Device B, Device C and Device D constitute primary ring 1;
z
Specify Device A as the master node of primary ring 1, Ethernet 1/0/1 as the
primary port and Ethernet 1/0/2 as the secondary port;
z
Specify Device B, Device C and Device D as the transit nodes of primary ring 1,
their Ethernet 1/0/1 as the primary port and Ethernet 1/0/2 as the secondary port;
z
The timers of the primary ring adopt the default value.