Operation Manual – IPv4 Routing
H3C S3610&S5510 Series Ethernet Switches
Chapter 3 OSPF Configuration
3-48
# Display information about neighbors on Switch A.
[SwitchA] display ospf peer
OSPF Process 1 with Router ID 192.168.0.1
Neighbors
Area 0.0.0.0 interface 192.168.0.1(Vlan-interface 100)'s neighbors
Router ID: 192.168.0.2 Address: 192.168.0.2 GR State: Normal
State: Full Mode:Nbr is Master Priority: 1
DR: 192.168.0.2 BDR: 192.168.0.1 MTU: 0
Dead timer due in 36 sec
Neighbor is up for 00:15:04
Authentication Sequence: [ 0 ]
Neighbors
Area 0.0.0.1 interface 192.168.1.1(Vlan-interface 200)'s neighbors
Router ID: 172.16.1.1 Address: 192.168.1.2 GR State: Normal
State: Full Mode:Nbr is Slave Priority: 1
DR: 192.168.0.1 BDR: 172.16.1.1 MTU: 0
Dead timer due in 39 sec
Neighbor is up for 00:07:32
Authentication Sequence: [ 0 ]
# Display OSPF routing information on Switch A.
[SwitchA] display ospf routing
OSPF Process 1 with Router ID 192.168.0.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
172.16.1.0/24 1563 Stub 192.168.1.2 172.16.1.1 0.0.0.1
172.17.1.0/24 3125 Inter-area 192.168.0.2 192.168.2.1 0.0.0.0
192.168.1.0/24 1562 Stub 192.168.1.1 192.168.0.1 0.0.0.1
192.168.2.0/24 3124 Inter-area 192.168.0.2 192.168.2.1 0.0.0.0
192.168.0.0/24 1562 Stub 192.168.0.1 192.168.0.1 0.0.0.0
Total Nets: 5
Intra Area: 3 Inter Area: 2 ASE: 0 NSSA: 0
# Display the Link State Database on Switch A.
[SwitchA] display ospf lsdb
OSPF Process 1 with Router ID 192.168.0.1
Link State Data Base
