Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 Information Center Configuration
1-14
Follow these steps to enable synchronous information output:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable synchronous
information output
info-center
synchronous
Required
Disabled by default
Note:
z
If you do not input any information following the current command line prompt, the
system does not display any command line prompt after system information output.
z
In the interaction mode, you are prompted for some information input. If the input is
interrupted by system output, no system prompt will be made, rather only your input
will be displayed in a new line.
1.3 Displaying and Maintaining Information Center
To do…
Use the command…
Remarks
Display channel
information for a specified
channel
display channel
[
channel
-
number |
channel
-
name
]
Available in any
view
Display the configurations
for all information
channels except channel
6 to 9
display info-center
Available in any
view
Display the state of the log
buffer and the log
information recorded
display logbuffer
[
level
severity
|
size
buffersize
] * [ |
{
begin
|
exclude
|
include
}
text
]
Available in any
view
Display a summary of the
log buffer
display logbuffer
summary
[
level
severity
]
Available in any
view
Display the state of the
trap buffer and the trap
information recorded
display trapbuffer
[
size
buffersize
]
Available in any
view
Reset the log buffer
reset logbuffer
Available in user
view
Reset the trap buffer
reset trapbuffer
Available in user
view
