Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Chapter 3 QoS Policy Configuration
3-6
To do…
Use the command…
Remarks
Configure accounting
action
accounting
Configure TP action
car
{
cir
committed-information-rate
[
cbs
committed-burst-size
[
ebs
excess-burst-size
] ] [
pir
peak-information-rate
] [
red
{
discard
|
pass
} ]
| name
global-car-name
}
Configure traffic
filtering behavior
filter
{
deny
|
permit
}
Configure traffic
mirroring action
mirror-to interface interface-type
interface-number
Configure nested
VLAN tag action
nest top-most vlan-id vlan-id
Configure traffic
redirect action
redirect
{
cpu
|
interface
interface-type interface-number |
next-hop
{
ipv4-add
[
ipv4-add
] |
ipv6-add
[
interface-type
interface-number
] [
ipv6-add
[
interface-type
interface-number
] ] } }
Remark DSCP value
for packets
remark dscp
dscp-value
Remark 802.1p priority
for packets
remark dot1p
8021p
Remark drop
precedence for
packets
remark drop-precedence
drop-precedence-value
Remark IP precedence
for packets
remark ip-precedence
ip-precedence-value
Remark local
precedence for
packets
remark local-precedence
local-precedence
Remark the service
provider network
VLAN ID for packets
remark service-vlan-id
vlan-id-value
Configure to get other
precedence’s for
packets through the
corresponding priority
mapping table
primap
pre-defined
{
dscp-lp
|
dscp-dp
|
dscp-dot1p
|
dscp-dscp
}
Required
You can configure
the traffic behavior
as required.
