Operation Manual – Multicast Protocol
H3C S3610&S5510 Series Ethernet Switches
Chapter 7 MSDP Configuration
7-23
Elapsed time since last connection or counters clear: 00:17:51
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
7.7.2 Anycast RP Configuration Example
I. Network requirements
z
The PIM-SM domain has multiple multicast sources and receivers. OSPF runs
within the domain to provide unicast routes.
z
The anycast RP application is configured in the PIM-SM domain. When a new
member joins the multicast group, the switch directly connected to receivers can
initiate a Join message to the topologically nearest RP.
z
An MSDP peering relationship is set up between Switch C and Switch F.
z
On Switch C and Switch F, the interface Loopback 1 is configured as a C-BSR,
and Loopback 10 is configured as a C-RP.
z
The router ID of Switch C is 1.1.1.1, while the router ID of Switch F is 2.2.2.2.
