Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Chapter 1 IPv6 Basics Configuration Commands
1-9
Field
Description
State
State of a neighbor, including:
z
INCMP: The address is being resolved. The link layer
address of the neighbor is unknown.
z
REACH: The neighbor is reachable.
z
STALE: The reachability of the neighbor is unknown. The
device will not verify the reachability any longer unless
data is sent to the neighbor.
z
DELAY: The reachability of the neighbor is unknown. The
device sends an NS message after a delay.
z
PROBE: The reachability of the neighbor is unknown.
The device sends an NS message to verify the
reachability of the neighbor.
T
Type of neighbor information, including static configuration
and dynamic acquisition.
Age
For a static entry, a hyphen “-“ is displayed. For a dynamic
entry, the reachable time (in seconds) elapsed is displayed,
and if it is never reachable, “#” is displayed (for a neighbor
acquired dynamically).
1.1.7 display ipv6 neighbors count
Syntax
display ipv6 neighbors
{
{
all | dynamic
|
static
} [
slot
slot-number
] |
interface
interface-type interface-number
|
vlan
vlan-id
}
count
View
Any view
Parameters
all
: Displays the total number of all neighbor entries, including neighbor entries
acquired dynamically and configured statically.
dynamic
: Displays the total number of all neighbor entries acquired dynamically.
static
: Displays the total number of neighbor entries configured statically.
slot
slot-number
: Displays the total number of neighbor entries of a specified slot.
interface interface-type interface-number
: Displays the total number of neighbor
entries of a specified interface.
vlan
vlan-id
: Displays the total number of neighbor entries of a specified VLAN whose
ID ranges from 1 to 4094.
