Command Manual – VLAN
H3C S7500E Series Ethernet Switches
Chapter 4 GARP/GVRP Configuration Commands
4-2
4.1.2 display garp timer
Syntax
display
garp timer
[
interface interface-list
]
View
Any view
Parameters
interface interface-list
: Specifies an Ethernet port list, in the format of {
interface-type
interface-number
[
to
interface-type interface-number
] }&<1-10>, where &<1-10>
means that you can specify up to 10 port ranges. A port range defined without the
to
interface-type interface-number
portion comprises only one port.
Description
Use the
display
garp timer
command to display GARP timer settings of specific ports.
Note that:
z
If the
interface interface-list
keyword-argument combination is not specified, this
command displays the GARP timer settings of all the ports.
z
If the
interface interface-list
keyword-argument combination is specified, this
command displays the GARP timer settings of the specified ports.
Related commands:
garp timer
,
garp timer leaveall
.
Examples
# Display GARP timers on port Ethernet 2/0/1.
<Sysname> display garp timer interface ethernet 2/0/1
GARP timers on port Ethernet2/0/1
Garp Join Time : 20 centiseconds
Garp Leave Time : 60 centiseconds
Garp LeaveAll Time : 1000 centiseconds
Garp Hold Time : 10 centiseconds
4.1.3 garp timer
Syntax
garp timer
{
hold
|
join
|
leave
}
timer-value
undo garp timer
{
hold
|
join
|
leave
}
View
Ethernet port view, port group view
