Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Chapter 2 RMON Configuration Commands
2-2
Field
Description
VALID
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means
invalid. You can use the
display rmon
command to
view the invalid entry and with the
display
current-configuration
and
display this
commands
you cannot view the corresponding
rmon
commands.)
Samples type
The sampling type (absolute in this example)
Variable formula
Formula for the sampling value
Sampling interval
Sampling interval
Rising threshold
Alarm rising threshold (When the sampling value is
bigger than or equal to this threshold, a rising alarm is
triggered.)
Falling threshold
Alarm falling threshold (When the sampling value is
smaller than or equal to this threshold, a falling alarm is
triggered.)
When startup enables
How an alarm can be triggered
Latest value
The last sampled value
2.1.2 display rmon event
Syntax
display rmon event
[
entry-number
]
View
Any view
Parameters
entry-number
: Index of an RMON event entry, in the range 1 to 65535. If no entry is
specified, the configuration of all event entries is displayed.
Description
Use the
display rmon event
command to display the configuration of the specified or
all RMON event entries.
Displayed information includes event index, event owner, event description, action
triggered by the event (such as sending log or trap messages), and last time the event
occurred (the elapsed time since system initialization/startup) in seconds.
Related commands:
rmon event
.